Typical Bay Window Sizes UK
Most bay windows are made to measure. A three-section bay is often around 2.4m wide, while larger five-section bays can be around 3.6m. Use these figures as a guide, then enter your own size to see how much your bay window should cost.

What are typical bay window sizes?
There is no single standard bay-window size because most replacements are made to measure. The dimensions below are useful reference points for budgeting, not sizes to order without a survey.
What does three-section or five-section mean?
The number describes how many window faces make up the bay. A three-section bay usually has a centre window with a section on each side; a five-section bay has five faces. Count the sections before comparing sizes, because two bays with the same overall width can have different individual panes and angles.
What changes the price
- overall opening width
- projection from the wall
- centre-pane to side-pane ratio
- cill and roof dimensions
How to use these prices
Treat online size charts as budgeting references rather than an instruction to order a stock unit. Existing bays in Victorian, Edwardian and 1930s houses often differ enough that a proper survey is essential.
For an early budget, note the approximate width, height and number of sections. An installer will also check the bay's projection and angles, so your rough figures are for comparing prices, not manufacturing the new frames. Try your measurements in the calculator.
Get a price for your windows
Choose the closest option and add a rough size for your bay window. Then select your area and any extras for a personalised price.
Rough sizes are fine to start. You can refine the details before viewing your personalised price.Where the prices come from
These are guide prices, not a quotation for your property. Two suppliers may include different products or fitting work, so check the frame, glazing, labour, disposal and VAT before comparing totals.
- BSF standard window sizes guide
- GreenMatch uPVC window sizes
Measure the whole shape, not just the front glass
A bay has an overall face width, individual section widths and a projection out from the wall. The angles between sections also matter. These measurements help an installer establish the frame geometry rather than treating the bay as a single flat window.
For a budgeting estimate, approximate dimensions are useful, but do not order bay sections from DIY measurements. Final manufacturing sizes and checks on existing support should come from the installer’s survey.
Related price guides
Compare replacement bay-window prices, different frame materials and the effect of size on a fitted quote.
What can change the final price?
Is 2400mm a standard bay window width?
It is a common reference size for a three-section bay in published guides, but replacement bays are usually made to measure.
How wide is a five-section bay?
One published reference chart uses about 3,600mm wide by 1,200mm high for a five-section bay.
Should I order from an online size chart?
No. Use reference dimensions for budgeting only; an installer should survey the actual opening before manufacture.
Know what your windows or doors could cost
Know how many sections your bay has? Enter its approximate size and your location for a replacement-price estimate before speaking to installers. Final sizes need a professional survey.
Calculate my price →