Window Price Calculator
Made-to-measure doors · November 2026

Made-to-Measure Bifold Doors: Sizes, Survey and Quotes

Most external bifold systems are configured around a measured opening rather than bought as a one-size-fits-all set. Made-to-measure is useful, but it does not remove the manufacturer’s limits on leaf dimensions, hardware or glazing weight.

UK homeowner guideUpdated 17 Nov 2026Independent advice
Made-to-measure aluminium bifold doors opened across a British kitchen extension
Custom-size doors still need a surveyed opening, suitable structure and an agreed folding plan.

What does “made to measure” actually include?

For external bifolds, made to measure normally means that the manufacturer fabricates the frame and leaves to a project-specific width and height within the limits of its tested system. It does not mean that any opening can be glazed without redesigning the supporting wall. The installer still has to choose an appropriate panel count, hardware arrangement, threshold and glazing combination.

Some companies advertise standard modules, while others quote from a configurable range. Ask whether your price is for a true surveyed doorset, a stock-sized frame with additional trim, or a different product that happens to fit. All three may look similar in an online photograph, but they can differ in the amount of visible framing and making good.

Start with rough dimensions, then arrange a survey

For early budgeting, note the approximate overall width and height of the existing opening, take photographs showing the inside and outside, and record whether the floor is tiled, timber or still under construction. These are sufficient to start a conversation; they are not manufacture-ready dimensions.

The professional survey should verify the opening at multiple positions, the condition of the supporting brickwork, the finished floor and patio levels, and the planned direction of the door stack. It should identify out-of-square reveals, space for seals and drainage, and whether a suitable lintel is already present. Any enlargement of the opening may need structural input that is outside the door supply price.

Choosing the number of panels

There is no universal rule that a particular width must have exactly three, four, five or six leaves. Each system has its own permitted panel dimensions and weight ratings. For a smaller opening, fewer panels may offer a cleaner view and simpler folding action. A much wider opening may need more leaves, but that introduces additional frame lines and affects the stack position.

Ask for a plan view showing how the panels fold rather than relying on a straight-on photograph. Think about where furniture goes when the doors are open and whether you need an independent access leaf for everyday use.

Made-to-measure doors and fitted prices

Prices change with overall size, number of panels, aluminium or other frame specification, colour, glazing, the threshold and fitting circumstances. A made-to-measure label alone does not prove that a quote is excessive. Equally, a very low advertised price may exclude installation, disposal, external finishing or the structural alterations needed to create the opening.

Compare quotations against the same schedule: exact surveyed size, panel arrangement, product system, glazing performance, security specification and fitting scope. A quote that includes suitable making good cannot be compared fairly with one that ends when the new frame is screwed into place.

Our bifold door prices guide contains published examples for common arrangements, while the quote calculator provides a starting estimate for a complete fitted door project. The calculator is not a manufacturer’s custom fabrication quote and will not price steelwork or highly specialist configurations.

Materials and glazing choices

Aluminium is widely used for larger glazed openings because the systems are designed around relatively slim structural frame sections. The actual profile, reinforcement and thermal break still vary. If another material is offered, ask for the maximum supported panel dimensions and the maintenance expectations.

Glazing should be discussed in terms of safety, overall thermal performance and the complete door’s tested characteristics. Glass upgrades can alter weight as well as cost. For a sunny south-facing extension, ask about glare and overheating before paying extra for the most complicated specification.

A practical pre-order checklist

Frequently asked questions

Can bifolds be made for an unusual width?

Often, yes, provided that width falls within the chosen system’s permitted size and weight limits. The manufacturer may recommend a different panel count or another product altogether.

Should I order from my own measurements?

Use your measurements for early budgeting only. The installer or specialist surveyor should confirm manufacture dimensions and take responsibility for the fitting tolerances stated in the contract.

Are custom bifolds always more expensive than standard sizes?

Not necessarily. Many external bifold products are configured to order as normal. Complexity, unusual finishes, oversized leaves and site work usually matter more than the phrase “made to measure”.

Related guides

Further reading

Independent information on choosing suitable windows, glazing and doors:

Know what your quote should cost

Add your windows and doors using our interactive calculator before getting quotes. See what you should expect to pay and potentially save thousands by avoiding an overpriced quote.

Use our Quote Calculator →Fitting & VAT included · No sales calls