Window Price Calculator
Window & door sizes · November 2026

Standard External Door Sizes UK

UK external timber door leaves are sold in familiar imperial-based sizes, but a complete front or back doorset is larger than the leaf alone. Always distinguish the door slab, frame and brick opening.

UK homeowner guideUpdated 17 Nov 2026Independent advice
New blue external front door fitted within a British brick house door frame
A nominal door-leaf measurement is not the same as the overall frame size.

Common door-leaf examples

Stock timber exterior doors are often offered around 1,981 × 762mm, 1,981 × 838mm and 2,032 × 813mm (height × width). These figures describe the leaf, not the installed frame.

Composite and uPVC replacement doors are frequently sold as complete factory-made doorsets, and their frame dimensions depend on the chosen range.

WHAT TO KNOW

Why your brick opening needs checking

The installer must allow for the outer frame, sill, door swing, weather sealing and suitable fitting gaps. Older houses may have openings that are not square, and a new frame could change the effective clear opening.

Note the actual size of your existing door and the opening separately; never assume two doors labelled “838mm” will fit identically.

Accessibility, security and glazing

A wider door leaf is not automatically a wider usable entrance once hinges, frame projections and the open door are considered. Ask about clear passage, threshold height, locks, letterbox position and safety glazing where needed.

Replacing a door with a different type or widening a structural opening may involve extra checks beyond a straightforward frame-for-frame change.

Common questions

Is 1,981 × 838mm the size of the whole front door?

Usually it is a quoted leaf size. The full external doorset is larger once the frame is added.

Can a composite door be made to measure?

Many ranges offer made-to-measure complete doorsets within manufacturer limits.

What if my opening is an unusual size?

An installer can advise on a suitable made-to-measure frame or whether structural work is needed.

PRACTICAL ADVICE

Getting comparable quotations

Give every supplier the same photographs, rough width and height, required material and any glazed panels. Ask for confirmation that the total includes the frame, threshold, ironmongery, fitting, making good, disposal and VAT.

Before you decide

The calculator estimates supported complete doors, but only a measured installer survey can confirm what fits.

Related guides

Continue with these closely related questions before comparing quotations.

Sources and further reading

Independent guidance used to check the technical points above. Figures and product choices must still be confirmed for your own property.

Before companies come round

Know what your quote should cost

Record leaf and opening sizes separately; never order solely by the nominal door-leaf size. For a complete replacement, compare a personalised budget with written installer quotes and check exactly what is included.

Use our Quote Calculator →