How to Measure Replacement Windows for a Quote
For an early price estimate, note the approximate width and height of each existing window, its opening style and the number you want to replace. Your measurements are for budgeting—not for manufacturing.

Start with a room-by-room window list
Write down the room, approximate width and height in millimetres, frame material, colour and opening configuration. Count fixed panes and openers; two windows of the same width can carry different hardware costs.
Take one photograph per opening so you do not confuse the kitchen window with the bedroom window later. If you are unsure about dimensions, the calculator also accepts approximate sizes.
Take sensible width and height readings
Where safe, measure the visible opening in several places and note the smallest reading. Record whether you measured the masonry opening, existing frame or visible glass, because those are different dimensions.
Do not remove beads, seals or frames to get a closer measurement. If access is awkward or the window is upstairs, estimate from indoors and leave technical survey work to the professional.
Why a fitting survey is still essential
A fitter will check squareness, reveal depth, sill projection, drainage, movement, ventilation requirements and safe access. The final order size needs allowances specific to the frame system and actual opening.
Never instruct a manufacturer to cut frames based only on an online guide or a rough tape-measure reading. A wrong size can turn a simple job into expensive remedial work.
Common questions
Can I use rough sizes for the price calculator?
Yes. Approximate size options are sufficient for an early estimate.
Should I measure the pane or the full opening?
Record what you measured. Pane size, frame size and wall opening are not interchangeable.
Can I order replacement frames from my measurements?
A professional site survey should confirm ordering dimensions before manufacture.
Turn your measurements into a useful quotation
Give installers the same product list and ask all of them to quote for equivalent frame, glazing, ventilation, labour, removal and VAT. If you want to change an opening or move a lintel, make that a separate item.
Your calculator estimate can then be a reference point for complete window replacement. It will not produce a manufacturing drawing or approve structural changes.
Related guides
Continue with these closely related questions before comparing quotations.
Sources and further reading
Independent guidance used to check the technical points above. Figures and product choices must still be confirmed for your own property.
Know what your quote should cost
Write down what you measured and label it, so a supplier does not mistake visible glass size for the frame opening. For a complete replacement, compare a personalised budget with written installer quotes and check exactly what is included.
Use our Quote Calculator →